Robert Allan JamesandClaude Sonnet 5 849b83b727 Zuse default-attach: xHCI initial-port-scan fix, ZUSEDISK wiring, mismatched-marker resync ...

xhci_bringup() now scans for already-connected ports at bring-up
(xhci_scan_ports_for_already_connected()), not just later hotplug events,
so a USB device present on the QEMU command line at launch is detected.
Makefile.starkernel attaches disk/zuse.img on the xhci0 bus by default in
all three arch qemu targets (ZUSEDISK=, empties for a bare boot).

capsule_mint_identity() gained a drive_known_blank param to skip a fully
redundant second homeblocks_sig_check() when the caller already confirmed
HOMEBLOCKS_SIG_BLANK itself.

Root-caused what looked like a hang after the drive attached: Artemis's
fence still carried a genesis marker from before a mid-session reformat,
while the reformatted disk/zuse.img read back BLANK -- a mismatched pair
capsule_zuse_boot_try_attach() correctly declined to act on, leaving the
boot idling at a plain ok> with nothing left to log (indistinguishable
from a hang under slow TCG). Fixed by zeroing both disk/artemis.img and
disk/zuse.img at their original sizes, giving a matched blank pair.
Verified full three-architecture acceptance: amd64 fresh genesis-mint,
aarch64/riscv64 clean reload against the same now-minted images.

Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01KBjfeLPo71sUQ8zC7V7P5m

2026-08-28 21:42:14 -04:00

64 MiB

Raw Permalink History

The file is too large to be shown. View Raw