Robert Allan JamesandClaude Sonnet 5
59458a0a16
Cursor (Captain Bob: "the only thing we need is a cursor"): vt100_draw_cursor() draws a solid block at the terminal's current position, called from repl.c after the prompt prints and after every keystroke/backspace. vt100_erase_cursor() cleans up the one gap a static cursor has -- Enter/newline moves away from the cursor cell without a character draw ever overwriting it, which left a stray block behind until this fix. HB-ON/HB-OFF (Captain Bob: run a program with or without instrumentation without rebuilding): Converted per-tick DoE logging from a build-time flag (HEARTBEAT_DOE_LOG) to a runtime one. doe_log_tick_row() now self-gates on g_doe_log_enabled (default 1, matching the old default) instead of being compiled out entirely; the call site in vm_runtime.c is unconditional. Two new FORTH words, HB-ON and HB-OFF, flip the flag live. Removed the now-dead HEARTBEAT_DOE_LOG plumbing: the Kconfig symbol, and the -D forwarding in both LOADER_CFLAGS and KERNEL_CFLAGS. Verified: three-arch clean QEMU boot + logs; dictionary word count 466 (463 baseline + ALT+TAB + HB-ON + HB-OFF, exactly the three words added across this session); amd64 screendump confirms the cursor renders correctly after real interactive typing. Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
140 lines
5.1 KiB
C
140 lines
5.1 KiB
C
/*
|
||
StarForth — Steady-State Virtual Machine Runtime
|
||
|
||
Copyright (c) 2023–2025 Robert A. James
|
||
All rights reserved.
|
||
|
||
Licensed under the StarForth License, Version 1.0.
|
||
*/
|
||
|
||
/**
|
||
* vt100.h — Full-color ANSI / VT100 terminal state machine
|
||
*
|
||
* Sits on top of the framebuffer driver. Call vt100_init() once the
|
||
* framebuffer is ready, then route all character output through vt100_putc().
|
||
*
|
||
* Supported escape sequences
|
||
* ──────────────────────────
|
||
* Cursor movement ESC[H ESC[n;mH ESC[nA ESC[nB ESC[nC ESC[nD
|
||
* Cursor save/restore ESC[s ESC[u (also ESC7 / ESC8)
|
||
* Erase ESC[2J ESC[K ESC[0K ESC[1K ESC[2K
|
||
* SGR attributes ESC[…m (see below)
|
||
*
|
||
* SGR codes
|
||
* ─────────
|
||
* 0 reset all attributes
|
||
* 1 bold (doubles fg brightness)
|
||
* 4 underline
|
||
* 7 reverse video
|
||
* 22 normal intensity
|
||
* 24 underline off
|
||
* 27 reverse off
|
||
* 30–37 set fg to standard ANSI color 0–7
|
||
* 38;2;r;g;b set fg to 24-bit RGB truecolor
|
||
* 38;5;n set fg to 256-color index
|
||
* 39 reset fg to default
|
||
* 40–47 set bg to standard ANSI color 0–7
|
||
* 48;2;r;g;b set bg to 24-bit RGB truecolor
|
||
* 48;5;n set bg to 256-color index
|
||
* 49 reset bg to default
|
||
* 90–97 set fg to bright ANSI color 8–15
|
||
* 100–107 set bg to bright ANSI color 8–15
|
||
*/
|
||
|
||
#ifndef STARKERNEL_VT100_H
|
||
#define STARKERNEL_VT100_H
|
||
|
||
#include <stdint.h>
|
||
|
||
/* Default terminal colors */
|
||
#define VT100_DEFAULT_FG FB_RGB(0xAA, 0xAA, 0xAA) /* light gray */
|
||
#define VT100_DEFAULT_BG FB_RGB(0x00, 0x00, 0x00) /* black */
|
||
|
||
/* -----------------------------------------------------------------------
|
||
* Lifecycle
|
||
* --------------------------------------------------------------------- */
|
||
|
||
/**
|
||
* Initialize the VT100 terminal.
|
||
* Must be called after fb_init(). Clears the screen and homes the cursor.
|
||
*/
|
||
void vt100_init(void);
|
||
|
||
/**
|
||
* FABRIC.md item 4.4j: switch the glyph-draw backend from font_8x16.c to
|
||
* TTF-TEXT's rasterizer for everything drawn from this call onward --
|
||
* boot/POST output before this call stays font_8x16.c, unaffected.
|
||
* Lazily loads the font capsule and its raster cache on first call
|
||
* (no-op on later calls). Recomputes cols/rows for the new cell size and
|
||
* clears the screen, since the two glyph backends use different cell
|
||
* dimensions. TTF point size/cell dimensions decided final by FABRIC.md
|
||
* item 4.4m (20px text, 96px REPL strip). No-op if the font capsule
|
||
* fails to load (stays on font_8x16.c; logged, not fatal).
|
||
*/
|
||
void vt100_enable_ttf(void);
|
||
|
||
/**
|
||
* FABRIC.md item 4.4q: move the REPL scrollback view back/forward by
|
||
* @p n lines and redraw. Offset 0 (the default, and where every call
|
||
* eventually returns to) is the live view -- the same content already on
|
||
* screen. Clamped at both ends: back cannot pass the oldest stored line,
|
||
* forward cannot pass the live view. No-op (including no redraw) if the
|
||
* scrollback buffers failed to allocate at vt100_enable_ttf() time, or
|
||
* before TTF mode is active at all.
|
||
*
|
||
* Known limitation: redraw uses the terminal's current default fg/bg,
|
||
* not each line's original SGR color state at the time it was printed
|
||
* (colors aren't stored per-cell) -- text content is recovered exactly,
|
||
* color is not.
|
||
*/
|
||
void vt100_scroll_back(uint32_t n);
|
||
void vt100_scroll_fwd(uint32_t n);
|
||
|
||
/* -----------------------------------------------------------------------
|
||
* Character output
|
||
* --------------------------------------------------------------------- */
|
||
|
||
/** Feed one byte into the terminal (handles escape sequences transparently). */
|
||
void vt100_putc(char c);
|
||
|
||
/** Feed a null-terminated string. */
|
||
void vt100_puts(const char *s);
|
||
|
||
/**
|
||
* FABRIC.md item 4.4y-revised: toggle the full-screen vt100 terminal
|
||
* between visible (normal operation) and hidden (graphics mode -- the
|
||
* terminal stops drawing, letting direct framebuffer/TTF-TEXT calls show
|
||
* through undisturbed). Toggling back to visible does a full redraw of
|
||
* the terminal's current on-screen content, restoring it exactly as it
|
||
* was. No-op before TTF mode is active.
|
||
*/
|
||
void vt100_toggle_graphics(void);
|
||
|
||
/**
|
||
* Draw a solid block cursor at the terminal's current position. Static,
|
||
* not blinking. Idempotent -- safe to call after every keystroke, since
|
||
* whatever gets typed next naturally overwrites it. No-op before TTF mode
|
||
* is active or while in graphics mode (vt100_toggle_graphics()).
|
||
*/
|
||
void vt100_draw_cursor(void);
|
||
|
||
/**
|
||
* Erases whatever vt100_draw_cursor() last drew, restoring the cell to
|
||
* plain background. Call before moving away from a cursor-drawn cell
|
||
* without also drawing a character there (e.g. Enter/newline). No-op
|
||
* before TTF mode is active or while in graphics mode.
|
||
*/
|
||
void vt100_erase_cursor(void);
|
||
|
||
/* -----------------------------------------------------------------------
|
||
* Queries
|
||
* --------------------------------------------------------------------- */
|
||
|
||
/** Terminal width in character columns. */
|
||
uint32_t vt100_cols(void);
|
||
|
||
/** Terminal height in character rows. */
|
||
uint32_t vt100_rows(void);
|
||
|
||
#endif /* STARKERNEL_VT100_H */
|