Robert Allan JamesandClaude Sonnet 5
43aa0a2a36
Punch list §25 item 0.7 complete. This is what finally makes items 0.5 and 0.6 provably work end to end. apic_timer_start(): writes CNTP_TVAL_EL0 (or CNTHP_TVAL_EL2 at EL2 -- aarch64_current_el(), same EL-aware discipline as 0.4-0.6) to s_timer_period_tsc, then CTL.ENABLE=1/IMASK=0, followed by an ISB. The ISB is not decorative: confirmed against Linux's own arch_timer_reg_write_cp15() (arch/arm64/include/asm/arch_timer.h) that only the *control* register write needs synchronising before the enable/mask state is guaranteed visible to the interrupt pipeline -- TVAL/CVAL writes do not carry the same requirement, which is why apic_timer_rearm() omits it. TVAL is architecturally 32-bit but MSR-to-system-register is always a 64-bit instruction form -- passing a uint32_t operand directly failed to build (-Wasm-operand-widths). Fixed by truncating to 32 bits ourselves then zero-extending back to 64 for the operand, which supplies explicit, provably-correct zeros in the RES0 upper field rather than depending on unverified hardware behaviour -- Linux's own driver never exercises this path (it always uses the 64-bit CVAL form instead), so there was no local source to confirm the alternative against. apic_timer_rearm() (new): re-writes TVAL only, no ISB needed. TVAL is relative to "now," not an absolute deadline like riscv64's SBI interface (item 0.3), so there is no drift-correction bookkeeping -- each write means "N ticks from this instant." Wired into aarch64_irq_handler() and called *first*, before heartbeat_tick(), matching riscv64_timer_rearm()'s ordering discipline exactly: the ARM Generic Timer does not auto-reload, so a return path that skips this leaves the interrupt condition latched, which the GIC would redeliver the instant it's EOI'd -- a real storm, the same class of failure item 0.6's verification investigated (and that time found absent, because nothing was armed yet). Verified: builds clean; every generated instruction checked against disassembly, not just reviewed by eye (both EL branches, correct TVAL/CTL register names, single shared ISB in apic_timer_start(), no ISB in apic_timer_rearm()). Boots to ok> with no regression, dict_hash 0x3d4e1daf289da94f unchanged. Rate measured directly against real wall-clock time via QEMU's own -d int trap trace (same method as riscv64's item 0.3), two independent windows: 1,090 interrupts over 11.05 s (98.679 Hz) and 4,031 over 40.88 s (98.614 Hz) -- consistent across both, so this is a real, small, systematic bias (~1.3-1.4% slow), not measurement noise from polling granularity, which would have shrunk with the longer window and did not. Attributed to genuine per-interrupt service latency: TVAL is rewritten mid-ISR, so the trampoline save/restore, GICC_IAR read, EL branch and GICC_EOIR write all lengthen the effective period slightly versus the nominal 10 ms, inherent to any relative-countdown re-arm scheme. Reported as measured, not smoothed over. The interrupt sustained continuously across both windows with no stall and no storm, which is the primary evidence re-arm-every-tick is correct; the small rate bias is overhead, not a defect. Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
experiments/
Design of Experiments (DoE) campaign data and analysis for the LithosAnanke kernel.
bare_metal/— the bare-metal DoE experiment: blind full-factorial 2⁴ runs measuring the L8 Jacquard mode selector's effect on the Steady-State Machine across amd64/aarch64/riscv64. Seeexperiments/bare_metal/README.mdfor the full directory layout (runs/,latest/,analysis/{charts,tables,report}).
Hosted-VM DoE campaigns (factorial/heartbeat/ablation studies) live under
docs/working/experiments/ instead — this top-level directory is
specifically the kernel/bare-metal side.