Picked up from a crashed session: xhci_driver.h/xhci.h already had the bulk_in/out_ep_addr/max_packet fields and Endpoint-descriptor offset macros scaffolded, but the actual walk that populates them was never written. Added it: after 2f confirms a Mass Storage/SCSI/BOT interface, a nested walk continues through the Endpoint descriptors that follow it (bDescriptorType==5, stopping at the next Interface descriptor or end of stream), keeping only Bulk-type endpoints and splitting IN/OUT by bEndpointAddress bit 7. Also reset the four new fields in xhci_bringup(), which the scaffolding had missed. Also completed 2e's disconnect teardown, which was fully implemented this session (not scaffolded): a Disable Slot command is now submitted on a real disconnect, with the port's tracked slot ID captured and cleared from port_slot_id[] immediately (before the command completes) so a fresh connect on the same port isn't confused for one already in progress, and DCBAA[slot_id] cleared only on a successful completion. Verified live via QMP hotplug (deliberate device_add/device_del against freshly launched, individually-tracked instances -- not whatever happened to be attached at boot), all three architectures, byte-identical: bulk IN endpoint=0x81, bulk OUT endpoint=0x02, then a clean disconnect -> disable slot succeeded, no wedge. Caught and fixed a documentation near-miss in the same pass: an initial draft cited the probe-free three-arch acceptance boots as this feature's verification evidence, but a stale leftover log directory from a pre-crash orphaned QEMU process had been picked up by an `ls -dt | head -1` glob during monitoring and mistaken for this session's own result -- the real acceptance logs never had a device attached at all. Re-verified against real PIDs and real log paths before writing FABRIC-2.md's final writeup. FABRIC-2.md Section X Milestone 2 updated: 2e's disconnect-teardown checklist item marked done, 2g's endpoint-identification item marked partially done (identification only -- Configure Endpoint / EP Context wiring is still open). Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01R4VMX6VSKCten8nGgaMkq4
include/starkernel/
Headers for LithosAnanke, the bare-metal UEFI kernel (src/starkernel/).
Built only via Makefile.starkernel; gated by __STARKERNEL__ when shared
with hosted code.
uefi.h— UEFI protocol/type definitions consumed by the loader.elf64.h,elf_loader.h— ELF64 parsing and kernel-image loading.boot_info_offsets.h— struct-offset constants shared between the assembly bootstrap and the C boot path.arch.h,apic.h,timer.h— architecture init, APIC interrupt controller, timer (TSC/HPET/APIC, 100 Hz heartbeat).console.h,framebuffer.h,vt100.h— UART 16550 console, framebuffer driver, and VT100 terminal emulation over the framebuffer.pmm.h,vmm.h,kmalloc.h— physical memory manager (bitmap allocator), 4-level x86_64 paging, kernel heap allocator.pci.h,virtio_blk.h— PCI enumeration and the VirtIO block device driver (disk backend for the kernel block subsystem).capsule.h,capsule_birth.h,capsule_loader.h,capsule_run.h,capsule_vm_physics.h,capsule_generated.h— capsule system types, birth protocol, physics-runtime capsule bindings, and the build-time- generated capsule directory (seetools/mkcapsule.c).kernel_args.h,cmdline.h— boot-time kernel argument parsing (starforth.cfg/ command line).repl.h— kernel REPL.log.h,doe_log.h— kernel logging and DoE metrics logging.q48_16.h— kernel-build copy of Q48.16 fixed-point arithmetic.xxhash64.h— content-addressing hash used for capsule IDs.hal_memory.h— hardware-abstraction-layer memory interface.
Subdirectories:
hal/— top-level hardware-abstraction-layer interface.vm/— kernel VM subsystem headers (capsule arena, parity logging, bootstrap wiring).freestanding/— minimal libc-shim headers (assert.h,ctype.h,errno.h,inttypes.h,math.h,sched.h,signal.h,stdio.h,stdlib.h,string.h,time.h,sys/time.h,sys/types.h) for building shared VM code in the freestanding kernel environment, where no real libc is available.