FABRIC-2.md closed archival at ~4,400 lines / 51 open items, same reasoning
FABRIC.md itself was closed for at 7,595 lines -- continuing to append made
still-open work hard to find. All 51 open items carried forward into
FABRIC-3.md's new Section A, verified complete via programmatic diff against
the source (49 unique + 2 confirmed pure duplicates from FABRIC-2.md's own
F.3 cross-reference section, not dropped content). .claude/CLAUDE.md's
pointer note updated to name FABRIC-3.md as current.
New Section B: full audit of stadium_dispatch()'s four behaviour stubs
(MIGRATE/DELIVER/EXPIRE/COOL), triggered by investigating "words/VMs/blocks/
messages should all be on the same engine". Found the picture is more
nuanced than "everything's a stub" -- words are already fully live via a
separate bespoke mechanism (stadium_word_dispatch(), wired into vm_core.c's
real word-execution path, item 4.1), contradicting ONTOLOGY.md's stale
"not yet migrated" claim (flagged for a follow-up fix). MIGRATE (blocks)
and VM-COOL are genuinely stub with zero consumers; DELIVER (Hermes) and
EXPIRE (ACL) are substantial, undecided subsystem integrations FABRIC.md
itself already flagged as open, not touched here.
New standing rule, saved as memory feedback_no_stubs_or_todos.md: stub
implementations and TODO placeholders are never acceptable in this
workflow, in any language, ever -- triggered by finding stadium_dispatch()'s
stub handlers during this investigation.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01CXjAPTEKrgY2Mrk25KoLDn
Implements the full design from the prior commit in one pass. resolve_lbn()
is the single choke point threaded through the ten public LBN-consuming
entry points (blk_get_buffer, blk_update, blk_flush, blk_is_allocated,
blk_mark_allocated, blk_mark_free, blk_is_valid, blk_get_meta, blk_set_meta,
plus blk_get_empty_buffer covered via delegation) -- an LBN->LBN redirect,
not a new storage allocator, since the LBN space is already unified across
every attached blkio_dev backend. VM window cache staleness across a
relocation reuses the existing blk_vm_check_epoch() mechanism from
Milestone 2h's hot-detach fix for free -- g.epoch bumps on relocation too.
Persistence lands in the same pass: two new uint32_t fields
(reloc_start/reloc_devblocks) appended after hdr_crc in blk_volume_meta_t,
carved from existing padding without moving any earlier field's byte
offset -- an old formatted volume's zeroed padding reads back as
reloc_devblocks=0 ("no reloc capacity"), gracefully, not a format-breaking
change. compute_totals_from_B() generalized to account for the new
reserved region. reloc_flush_to_disk()/reloc_load_from_disk() mirror the
BAM I/O functions' own absolute-devblock-addressing shape; the persisted
copy's owner is first_disk_slot() (already existed, already used for this
exact "which device is canonical" question by blk_get_volume_meta()).
blk_subsys_relocate_block() is a mechanical primitive only -- copies
content (staged through a local buffer, since obtaining the target's
blk_get_buffer() result can evict and invalidate the source's cache
pointer if they share a device), frees the source BAM entry, appends the
exception entry, bumps the epoch, flushes to disk. RELOCATE-BLOCK exposes
it to FORTH, no policy of its own (ACL's job, per this session's direction).
A first live-test attempt gave a false negative against disk/artemis.img
(predates reloc capacity, so relocation only ever existed in memory that
boot) -- traced to the test's own setup before being mistaken for a bug,
then re-verified correctly against a fresh volume (new fixture,
disk/artemis-reloc-test.img): relocated a RAMDRIVE block to the fresh
disk, confirmed live resolution through the redirect, then confirmed both
the redirect and the relocated content survived an abrupt QEMU kill and
full reboot. Also fixed three lingering "glibc" doc-comment
misattributions from Milestone 2h (the actual allocator is this kernel's
own kmalloc) that survived an earlier FABRIC-2.md-only correction. All
three architectures re-verified clean.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01CXjAPTEKrgY2Mrk25KoLDn
Complete design, not just the earlier flag: resolve_lbn() as the single
choke point threaded through ten public entry points, LBN->LBN redirect
mechanism (no new storage allocator needed, the LBN space is already
unified across all backend-agnostic blkio_dev devices), VM window
staleness solved for free by reusing the existing epoch mechanism from
Milestone 2h's hot-detach fix, in-memory table shape, and on-disk
persistence via two new fields carved from blk_volume_meta_t's existing
padding (byte-compatible with old formatted volumes) using the same
absolute-devblock I/O pattern the BAM already uses. Ownership of the
persisted copy assigned to first_disk_slot() (already exists, already
used for this exact "which device is canonical" question), with the
multi-primary-device question for a future multi-SSD/cloud world
explicitly punted rather than hand-waved. Noted the known, separate
limitation: USB relocation targets aren't exercisable until WRITE(10)
exists in the xHCI driver -- verification will use two already-writable
devices instead. Policy (when to relocate, whether a target is validly
owned) stays ACL's job, not this primitive's.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01CXjAPTEKrgY2Mrk25KoLDn
Milestone 3 direction from this session: ACL decides when to relocate
(capacity pressure or a compudynamics heat/cold signal), migration
expected rare not routine. Flagging only, not designing yet: current
lbn_to_slot() is pure contiguous-range routing, one device owns one
unbroken range -- incompatible with relocating an individual block to a
different device while its LBN stays fixed. Direction sketched (a sparse
LBN-to-actual-device exception table, consulted before the range walk,
zero cost for the common never-relocated case) but the actual structure
is still open. Block-migration implementation now explicitly depends on
this revision landing first.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01CXjAPTEKrgY2Mrk25KoLDn
Dropped the hash-modulo-MAX_IDENTITIES approach: there is no way to bound
how many identities might ever exist, so no population size can be
pre-divided into slots regardless of hash function. Resolution: first
time an identity is seen, claim a range at the SSD's existing free-space
frontier (g.total_user_lbn, already used by every device attach) sized
to whatever it needs, write the assignment into the drive's own map;
every later visit just reads it back. No central directory, no quota,
matches Section U's existing requirements exactly.
Identity itself is a certificate signed by this project's own (not yet
created) CA root, extending Milestone 6's PKI design to users instead of
inventing a separate mechanism. Derivation-relevant value is the cert's
embedded pubkey, not its raw bytes -- a renewal shouldn't relocate an
already-allocated range.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01CXjAPTEKrgY2Mrk25KoLDn
Checked the math with Captain Bob: a PBAM for ~15GB of user blocks needs
only ~1.92MB (15M blocks / 32768 per 4KB page), fitting easily alongside
identity/credential/PKI material in a 1GB reserved region. No partition
table needed -- same whole-device pattern artemis.img already uses today,
just with a generously fixed ~1GB reserved region instead of tight
bam_start+bam_devblocks packing. Eliminates the GPT-parser work item
entirely (no GPT code exists in src/starkernel/ today). Confirmed no
conflict with Milestone 8's USB boot drive, which is a separate physical
drive (flashed starkernel.iso) with its own independent GPT/ESP need.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01CXjAPTEKrgY2Mrk25KoLDn
Makes blk_vm_flush_all() (block_words.c) non-static and declares it in
block_words.h -- it's already the entire implementation behind
SAVE-BUFFERS (block_word_save_buffers() is a one-line wrapper), so
sk_repl_idle() can call the exact same flush path outside word dispatch
without duplicating any logic. Cheap every idle tick regardless of dirty
state: every check inside is a small fixed-size scan, so no separate
pre-check was needed on top of it.
Caught a real bug via a live persistence test before trusting the
feature: the first version gated the flush on sk_repl_get_active_vm()
returning non-NULL, but NULL is that accessor's documented default
(Tripod's own USE-redirect override, "restore default dispatch") --
without an active USE redirect, the flush silently no-op'd for the
entire session. Confirmed live: wrote a byte via BUFFER (no
UPDATE/SAVE-BUFFERS), waited past the idle cadence, killed QEMU abruptly,
rebooted with the same disk image, read back 0 instead of the written
65. Fixed by threading the VM sk_repl_run()'s own loop already resolves
each iteration (g_repl_active_vm ? g_repl_active_vm : vm) down as a
parameter through sk_readline() into sk_repl_idle(), rather than trying
to re-derive it from an accessor with the wrong default. Re-ran the same
test after the fix: read back 65, matching the written byte -- the write
survived an abrupt kill with no explicit flush call anywhere in the
test, proving the idle-tick auto-flush genuinely ran.
All three architectures re-verified clean. FABRIC-2.md Section V item 6
and the corresponding Milestone 3 punch-list item marked done.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01CXjAPTEKrgY2Mrk25KoLDn
block_subsystem.c is shared/vendored source -- its calloc()/free() calls
resolve to real glibc in the hosted build, but to this kernel's own
freestanding shims (src/starkernel/vm/host/shim.c, backed by kmalloc()/
kfree() in src/starkernel/memory/kmalloc.c) in the kernel build, which is
where the address-reuse bug was actually diagnosed live. The previous
writeup said "glibc's allocator" -- wrong environment entirely. Verified
kmalloc_aligned() is a plain first-fit walk from heap_head with no
coalescing, confirming the same free-then-immediate-same-size-alloc reuse
behavior originally observed, just attributed to the right allocator.
Caught by the user asking directly whether this project has any glibc
dependency, given .claude/CLAUDE.md's strict ANSI C99/no-GNU-extensions
requirement (confirmed -std=c99 throughout both Makefiles). Documentation
correction only -- no code changed.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01CXjAPTEKrgY2Mrk25KoLDn
blk_subsys_detach_device() (block_subsystem.c) walks the device chain,
refuses removal of anything but the current tail (a mid-chain removal
would corrupt every later slot's start_lbn -- this architecture's own doc
already argues USB stays last specifically to avoid that), unlinks,
shrinks total_user_lbn, closes and frees the slot. Discards rather than
flushes dirty state -- the device is physically gone by the time this
runs (PORTSC disconnect only). Trigger wiring mirrors the attach path:
bot_msc_attached (set only once attach actually succeeds) gates a new
bot_msc_detach_pending flag set at PORTSC disconnect (not Disable Slot
completion, which is conditionally skipped and would miss concurrent
connect/disconnect pairs), consumed in sk_repl_idle().
Advisor flagged the real hazard ahead of time: block_words.c's VM block
window (blk_vm_lbn[]/blk_vm_cbuf[]) can go stale across a detach then a
same-LBN re-attach, and suggested a pointer-identity re-check in
blk_vm_load() as a minimal fix. That fix was implemented, then directly
falsified by its own designed-for-this test: attach a blank device, read
a block (populating the cache), detach, re-attach a device with distinct
content at the identical LBN, read again -- served stale content from
the first device. Root cause, confirmed live: glibc's allocator hands
free(slot) straight back to the very next same-size calloc(), so the
"fresh" and stale pointers were bitwise identical despite being two
different devices. Fixed properly with a monotonic blk_subsys_epoch()
counter (bumped on every attach/detach) checked by a new
blk_vm_check_epoch() helper at the one choke point (blk_vm_find(), plus
blk_vm_flush_all() which reads the same arrays directly) that covers
every path touching the window cache -- unfooled by address reuse.
Verified live with a new disk/usb-thumbdrive-test2.img fixture (distinct
content from the existing blank test image): attach A, read (cache hit
populated), detach, re-attach B at the same LBN, read again -- correctly
ran a fresh device read and returned B's real content, not A's stale
cached zeros. The failing pointer-comparison attempt's own capture log
kept as evidence, not deleted. All three architectures re-verified clean.
FABRIC-2.md Section X 2h marked complete -- enumeration through
hot-detach all live and verified; only WRITE(10) (2g's own still-open
item) remains unimplemented in the driver, not blocking anything here.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01CXjAPTEKrgY2Mrk25KoLDn
Wires a hot-plugged USB Mass Storage device into the block subsystem's
unified LBN chain. blkio_usb.c/blkio_usb.h mirror virtio_blk.c/
virtio_blk.h's established shape exactly (singleton state, blkio_vtable_t,
a blkio_usb_open_msc() "find" function playing virtio_blk_find_artemis()'s
role): read() translates a Forth block into a SCSI LBA/count pair and
calls xhci_bot_read_block() + xhci_bot_wait_for_idle(); write() returns
BLKIO_ENOSUP (no SCSI WRITE(10) exists yet, and blk_format_or_load_disk()
never writes at attach time, so read-only is sufficient -- confirmed by
reading that function first, not assumed). Refuses (-2) if the reported
SCSI block size doesn't evenly divide the 1024-byte Forth block size.
Connect-time wiring reuses the bot_msc_attach_pending/consume-in-
sk_repl_idle() shape the prior increment's temp probe already validated,
now made permanent: SET_CONFIGURATION sets the flag, sk_repl_idle()
(strictly after its own xhci_poll_events() call returns) calls
blkio_usb_open_msc() then blk_subsys_attach_device().
Verified live via hot-attach: full chain from USB connect through
'blkio_usb: MSC device ready' to 'blk: disk 'StarForth Volume' v2 LBN
26074..75184 (49111 user blocks)' -- real attachment, disk image confirmed
byte-for-byte untouched after. Chased a real debugging detour along the
way: the attach initially appeared silent (no blk: log line) -- traced to
LOG_INFO filtering at the default LOG_WARN boot level, not a functional
bug (settled via a temporary log-level bump, reverted after capture; also
found and reported, but did not fix, a pre-existing unrelated
Makefile.starkernel bug where --log-level=info via KERNEL_ARGS breaks
printf parsing). All three architectures re-verified clean. FABRIC-2.md
Section X 2h updated -- only hot-detach remains for 2h.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01CXjAPTEKrgY2Mrk25KoLDn
Closes the gap block_subsystem.c needs before any of 2h's real work
(blkio_usb.c, attach wiring, hot-detach) can start: this driver is fully
async/polled with no way for a synchronous caller (blkio_read()/
blkio_info() etc.) to get a result back. xhci_bot_wait_for_idle() is a
bounded busy-wait over xhci_poll_events() -- MUST be called only from
outside xhci_poll_events()'s own call frame, never from within it or a
next_action dispatch (recursion into live Event Ring/ERDP processing,
same class of hazard already documented for doorbell rings in this
driver). xhci_get_dev() exposes the module-static device handle to
outside callers that didn't observe the original hotplug event.
SCSI READ CAPACITY(10) (opcode 0x25) is the other half -- nothing could
learn a device's block size/capacity before this. First attempt sent it
bare and hit the classic first-command UNIT ATTENTION (CSW FAILED); fixed
with the same TUR-guard pattern READ(10) already used, generalized via a
new bot_tur_chain_target field so TEST UNIT READY's PASS handling can
chain into either command. bot_data_buf grown 512->1024 bytes (one Forth
block = two 512-byte SCSI blocks, per block_subsystem.c's own 1KiB-unit
convention).
Verified live via a temporary probe (hot-attached disk/usb-thumbdrive-
test.img via QMP, reverted after capture): TUR-guarded READ CAPACITY10
correctly reported last LBA=0x1ffff, block size=0x200 -- exactly 64MiB,
matching the test image byte for byte -- followed by a TUR-guarded
1024-byte/2-block READ10, both PASS. All three architectures re-verified
clean, probe-free boot to ok> on the reverted tree. FABRIC-2.md Section X
2h updated with the writeup; the blkio_usb.c backend itself is next.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01CXjAPTEKrgY2Mrk25KoLDn
Roots out the CSW status FAILED left unexplained in the prior increment: a
freshly attached SCSI target's standing UNIT ATTENTION condition, which a
bare READ(10) with no retry can never clear. xhci_bot_send_test_unit_ready()
sends SCSI TEST UNIT READY (SPC-4 6.33) ahead of the real command; the CSW
handler now tags command kind (bot_cmd_kind) to distinguish a TUR completion
from a READ10 completion, chains TUR PASS into the real READ(10), and
bounded-retries TUR on FAILED/PHASE ERROR (bot_tur_retries, capped at
XHCI_BOT_TUR_MAX_RETRIES). xhci_bot_read_block() is the new intended entry
point tying lba/num_blocks/block_size + the TUR-first sequencing together.
Verified live via a temporary probe (hot-attached disk/usb-thumbdrive-test.img
through the running instance's QMP socket), captured on amd64: full chain
CBW(TUR) -> FAILED -> retry -> PASS -> CBW(READ10) -> Data-In -> CSW PASS.
Probe reverted after capture; all three architectures re-verified clean,
probe-free boot to ok>. FABRIC-2.md Section X 2g updated with the writeup.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01CXjAPTEKrgY2Mrk25KoLDn
Completes the CBW -> Data-In -> CSW chain for READ(10) started last
commit. xhci_bot_read_data_in() and xhci_bot_receive_csw(), each a
single Normal TRB on the bulk IN Transfer Ring via a new
xhci_bulk_in_enqueue_and_ring() helper (mirrors the OUT-side helper
from CBW send). All three stages now chain automatically via the
existing deferred next_action pattern: CBW completion defers into
Data-In, Data-In completion defers into CSW receive, CSW completion is
where signature/tag/status validation happens.
Data-In reads into a new fixed 512-byte bot_data_buf -- single-block
scope for this increment, matches QEMU's usb-storage reported block
size; xhci_bot_send_read10() now refuses rather than overflow/truncate
if a request exceeds it. CSW validation (BOT spec section 5.2) checks
dCSWSignature and dCSWTag (a new bot_last_tag field, latched from the
CBW) before trusting bCSWStatus at all, so a garbled/misaligned CSW
read can't be misread as a clean pass. usb_bot_csw_t follows the same
struct-with-explicit-length-not-sizeof discipline as usb_bot_cbw_t.
Verified live via a temporary probe (written, run once, log captured,
reverted per this project's own probe convention), all three
architectures, byte-identical: the full CBW -> Data-In -> CSW exchange
completes cleanly, well-formed CSW with correct signature and echoed
tag, no wedge, clean disconnect immediately after. The SCSI command
itself reports CSW status FAILED against the current test fixture --
expected at this stage (no TEST UNIT READY / UNIT ATTENTION handling
implemented yet, consistent with a fresh-attach unit-attention
condition, not a transport-layer defect) and not root-caused further
here; the BOT mechanism itself is confirmed correct end to end.
Probe-free re-verification afterward on all three architectures.
FABRIC-2.md Section X Milestone 2g's CSW checklist item marked done;
"get one real READ(10) working end to end" stays explicitly open,
distinguishing "the mechanism works" from "the SCSI command succeeds."
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01R4VMX6VSKCten8nGgaMkq4
First real use of the bulk Transfer Rings Configure Endpoint wired up.
xhci_bot_send_read10() builds a 31-byte Command Block Wrapper (USB Mass
Storage Class Bulk-Only Transport spec section 5.1) and submits it as a
single Normal TRB on the bulk OUT ring via a new
xhci_bulk_out_enqueue_and_ring() helper -- a CBW is always exactly one
TRB, so unlike the EP0 helper this one rings its own doorbell rather
than leaving that to a caller assembling a group.
usb_bot_cbw_t is a real struct (every field up to the CDB array is
naturally aligned, and this driver's targets are all little-endian
already assumed everywhere else), but its DMA length is the explicit
USB_BOT_CBW_LENGTH (31) constant, never sizeof(*cbw), since the
compiler may pad the struct to 32 bytes. The SCSI READ(10) CDB itself
is written byte-by-byte since its LBA/Transfer Length fields are
big-endian on the wire, unlike everything else in this driver -- the
one place two byte orders are both live in the same function.
Completion is correlated via the existing pending_transfer_slot_id/
transfer_purpose gate (new XHCI_XFER_CBW_SENT purpose) -- no
ring-specific dispatch needed, since this driver's single-outstanding-
transfer scope already implies which ring produced an event.
This covers construction and send only (one third of a full READ(10):
CBW -> Data-In stage -> CSW) -- reading the Data-In stage and CSW
receive/validation are separate, explicitly not-yet-implemented items.
Verified live via a temporary probe (written, run once, log captured,
reverted per this project's own probe convention) -- all three
architectures, byte-identical: CBW submitted -> CBW send completed,
then a clean disconnect even with the Data-In stage never drained
(confirms no wedge on a dangling BOT transaction). Probe-free
re-verification afterward on all three architectures.
FABRIC-2.md Section X Milestone 2g's CBW checklist item marked done.
Also records a monitoring gotcha hit three times this session: `ls -t`
over the logs/ tree can return a stale leftover log from an earlier
run in the same session -- fixed going forward by reading the log path
off the actual running QEMU process's own command line instead, and a
memory note added so it doesn't recur next session.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01R4VMX6VSKCten8nGgaMkq4
Adds the xHCI Configure Endpoint command for the two bulk endpoints
identified by the previous increment, and fixes control-transfer
sequencing to match the spec: xHCI 1.2 section 4.3.5 requires Configure
Endpoint before SET_CONFIGURATION is sent to the device, the reverse of
the order this driver used through 2f (which happened to work against
QEMU's lenient qemu-xhci emulation but wasn't spec-correct).
New XHCI_TRB_TYPE_CONFIGURE_ENDPOINT_CMD, EP Context type constants for
Bulk IN/OUT, and an XHCI_EP_ADDR_TO_DCI() macro (DCI = 2*EndpointNumber
+ Direction) in xhci.h. xhci_cmd_configure_endpoint() builds the Input
Context (Slot + one EP Context per DCI up to the highest bulk endpoint
in use) and submits the command via the existing next_action deferral
mechanism, correlated on completion via a new
XHCI_CONN_AWAIT_CONFIGURE_ENDPOINT connect_state, then chains into the
existing SET_CONFIGURATION path.
Two allocations had to grow beyond what Address Device sized them for:
the Input Context (previously room for one EP Context only) and, less
obviously, the Device Context that DCBAA[slot_id] itself points at --
the controller only touches DCIs named in a command's own Add/Drop
flags, so growing that buffer required copying its existing Slot+EP0
content forward rather than zeroing it, to avoid handing the controller
a blank EP0 out from under an endpoint this command isn't touching.
Bulk Transfer Rings (bulk_in_ring/bulk_out_ring) are allocated and
wired into the new EP Contexts but not yet exercised by an actual
transfer -- CBW/CSW submission is next.
Verified live via QMP hotplug, all three architectures, byte-identical:
bulk endpoint identification -> configure endpoint command submitted ->
configure endpoint succeeded -> the existing set configuration ->
device configured chain, then a clean disconnect/disable-slot teardown
afterward with the larger Device Context installed.
FABRIC-2.md Section X Milestone 2g's endpoint identify+configure
checklist item marked fully done.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01R4VMX6VSKCten8nGgaMkq4
Picked up from a crashed session: xhci_driver.h/xhci.h already had the
bulk_in/out_ep_addr/max_packet fields and Endpoint-descriptor offset
macros scaffolded, but the actual walk that populates them was never
written. Added it: after 2f confirms a Mass Storage/SCSI/BOT interface,
a nested walk continues through the Endpoint descriptors that follow it
(bDescriptorType==5, stopping at the next Interface descriptor or end
of stream), keeping only Bulk-type endpoints and splitting IN/OUT by
bEndpointAddress bit 7. Also reset the four new fields in
xhci_bringup(), which the scaffolding had missed.
Also completed 2e's disconnect teardown, which was fully implemented
this session (not scaffolded): a Disable Slot command is now submitted
on a real disconnect, with the port's tracked slot ID captured and
cleared from port_slot_id[] immediately (before the command completes)
so a fresh connect on the same port isn't confused for one already in
progress, and DCBAA[slot_id] cleared only on a successful completion.
Verified live via QMP hotplug (deliberate device_add/device_del against
freshly launched, individually-tracked instances -- not whatever
happened to be attached at boot), all three architectures,
byte-identical: bulk IN endpoint=0x81, bulk OUT endpoint=0x02, then a
clean disconnect -> disable slot succeeded, no wedge. Caught and fixed
a documentation near-miss in the same pass: an initial draft cited the
probe-free three-arch acceptance boots as this feature's verification
evidence, but a stale leftover log directory from a pre-crash orphaned
QEMU process had been picked up by an `ls -dt | head -1` glob during
monitoring and mistaken for this session's own result -- the real
acceptance logs never had a device attached at all. Re-verified against
real PIDs and real log paths before writing FABRIC-2.md's final
writeup.
FABRIC-2.md Section X Milestone 2 updated: 2e's disconnect-teardown
checklist item marked done, 2g's endpoint-identification item marked
partially done (identification only -- Configure Endpoint / EP Context
wiring is still open).
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01R4VMX6VSKCten8nGgaMkq4
Chains off a confirmed Mass Storage/SCSI/BOT interface match via the
existing next_action deferral mechanism: device descriptor -> config
descriptor -> SET_CONFIGURATION is now a single automatic sequence.
bConfigurationValue is read directly out of the already-fetched
config_descriptor buffer, no extra transfer needed.
First write control transfer this driver has issued (every prior one was
a read), so it needed its own submission helper,
xhci_ep0_control_write_nodata() -- SET_CONFIGURATION has no Data Stage
(wLength=0), and per USB 2.0 spec 8.5.3 a no-data control transfer's
Status Stage is always IN, the reverse of an OUT-data request's status
stage. XHCI_SETUP_TRT_NO_DATA already existed in xhci.h, unused until now.
Verified live via QMP hotplug, all three architectures, worked first try,
byte-identical: "set configuration submitted" -> "device configured",
guest stays running throughout (checked via QMP query-status). Disconnect
confirmed clean on every arch afterward, no wedge. FABRIC-2.md Section X
Milestone 2f updated -- 2f is now fully complete, 2g (Bulk-Only Transport)
can start.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01QPfdtaXs9ay1nbwuMnrscu
Chains off the device descriptor request via a new deferred-action mechanism
on xhci_dev_t (next_action/next_action_slot_id/next_action_length): a short
9-byte Configuration descriptor read learns wTotalLength, then a full read
retrieves Config+Interface+Endpoint descriptors, walked for the Interface
descriptor to confirm bInterfaceClass/SubClass/Protocol == Mass Storage/
SCSI/Bulk-Only Transport.
The deferral exists because ringing the next doorbell synchronously inside
xhci_poll_events()'s event-processing loop -- before the current event's
ERDP write -- hung the guest outright (confirmed live via checkpoint
logging, amd64). Fixed by moving the actual control-transfer submission to
a small dispatch at the end of xhci_poll_events(), after ERDP is updated.
A debug hack that shipped mid-session (forcing a repeated 9-byte read
instead of chaining into the real 44-byte length, to isolate whether the
hang was doorbell-ordering or length-specific) has been reverted: restored
the real length and re-verified live. The doorbell-ordering fix was the
whole story -- the 44-byte read completes cleanly.
Verified live via QMP hotplug, all three architectures, byte-identical
results: wTotalLength=0x2c, bInterfaceClass=0x08, bInterfaceSubClass=0x06,
bInterfaceProtocol=0x50 -- confirmed Mass Storage/SCSI/BOT. Disconnect
confirmed clean on every arch, no wedge. FABRIC-2.md Section X Milestone 2f
updated with the full writeup.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01QPfdtaXs9ay1nbwuMnrscu
Adds Setup/Data/Status stage TRB types and control bits (IDT, TRT, DIR)
to xhci.h, and xhci_ep0_enqueue_trb()/xhci_ep0_get_device_descriptor() to
xhci.c -- the first real control transfer this driver has issued.
Follows the same enqueue-then-doorbell-once pattern as the Command Ring,
operating on the EP0 Transfer Ring built during 2e's Address Device work.
Setup Stage uses Immediate Data (parameter IS the 8-byte setup packet);
Data Stage reads into a reused 18-byte device_descriptor buffer; Status
Stage alone carries IOC, so exactly one Transfer Event signals transfer
completion, correlated via a new pending_transfer_slot_id (same
single-outstanding-operation pattern as connect/Enable Slot/Address
Device).
Automatically triggered once Address Device succeeds. Verified live via
QMP hotplug, all three architectures, worked first try with identical
results everywhere: idVendor=0x46f4, idProduct=0x0001, bDeviceClass=0x00
-- the class=0 confirms Mass Storage class detection needs the
Configuration/Interface descriptor (2f's next item), not the device
descriptor.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01HZ8kNoTuP63pbQtro4qvrm
New freestanding, verify-only Ed25519 (RFC 8032) implementation:
include/starkernel/{sha512,fe25519,scalar25519,ed25519}.h +
src/starkernel/crypto/{sha512,fe25519,scalar25519,ed25519}.c, wired into
Makefile.starkernel. Kernel never signs or generates keys -- only
ed25519_verify() is needed; signing happens in the host-side mkcapsule
build tool via libsodium/OpenSSL.
Confirmed __int128 multiply/add/shift-by-constant compile with zero
undefined symbols on all three target toolchains (only division needs
libgcc's __udivti3, per timer.c's existing documented finding -- that
file's comment updated to narrow the claim, since it had been read as
"avoid __int128 entirely"). This enabled the standard 5-limb radix-2^51
field arithmetic representation.
An abandoned first attempt (10-limb radix-2^26, avoiding __int128 out of
premature caution) hit two real bugs, both invisible on inspection and
found only by property-based testing against Python's own bignum
arithmetic: a non-uniform-radix limb misalignment in multiplication, and
a double-counted carry. Verification chain: SHA-512 against known +
boundary vectors (7/7); field arithmetic property-tested 25,045 cases;
scalar-mod-L arithmetic 300 cases (L confirmed prime via Miller-Rabin
first); full verify() end-to-end against 110 real signatures from
Python's cryptography library, including tampered inputs and the RFC
8032 S>=L malleability attack -- all correctly accepted/rejected.
Compiles clean (zero warnings) and links on all three architectures,
confirmed via the mandatory three-arch QEMU boot. The code is linked but
not yet called from anywhere -- wiring into capsule_birth.c needs a
from-scratch X.509/DER parser first (Captain Bob chose real X.509 over a
raw-blob cert format this session), which is the next open item.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01HZ8kNoTuP63pbQtro4qvrm
Adds Slot/Endpoint/Input Control Context structs (32-byte layout only --
HCCPARAMS1.CSZ checked live and confirmed 0 against this driver's QEMU
target; 64-byte contexts refuse rather than silently mis-laying-out),
xhci_cmd_address_device(), and a new dev->connect_state
(idle/await-enable-slot/await-address-device) sequencing Enable Slot and
Address Device per connect. Input Context (what the command TRB's
parameter points at) and Device Context (what DCBAA[slot_id] points at)
are separate 64-byte-aligned allocations, lazily created once and reused
across every connect -- single-device driver scope, no free path needed.
A new EP0 Transfer Ring uses the same fixed-ring-plus-Link-TRB pattern as
the Command Ring.
Two facts checked live before writing any context code, not assumed:
HCCPARAMS1.CSZ (32-byte, confirmed) and PORTSC.PED at connect time
(already set -- PORTSC=0x00021203, SuperSpeed -- the test device
self-enables via USB3 link training, so no port-reset state machine was
needed this increment; USB2 would need one, untested). Both diagnostics
also added console_puts/println-based hex logging (xhci_log_hex32()) --
console_println() only takes string literals, no formatted print existed
on this driver's console path before now.
Verified live via QMP hotplug, all three architectures, succeeded on the
first attempt with no debugging needed: "enable slot succeeded" ->
"address device command submitted" -> "address device succeeded" on
every boot.
Also fixes a FABRIC-2.md dependency-direction error from the previous
commit (Address Device is 2f's prerequisite, not the reverse).
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01HZ8kNoTuP63pbQtro4qvrm
xhci_poll_events()'s Port Status Change connect branch now calls
xhci_cmd_enable_slot() directly (the earlier boot-time smoke test call is
gone), tracked via a new dev->pending_connect_port_id -- since this
driver only ever has one command outstanding at a time, that alone
identifies which port a later Command Completion Event answers, without
needing to match the Command TRB Pointer yet. On success the returned
Slot ID is recorded in a new dev->port_slot_id[], a fixed
uint32_t[XHCI_MAX_TRACKED_PORTS] (32) indexed by port. Disconnect clears
the port's tracked slot (real teardown -- Disable Slot, DCBAA clear,
Section U callback -- is still a later increment).
Fixed array, not heap-allocated: a first attempt sized port_slot_id
dynamically via kmalloc_aligned(dev->max_ports * sizeof(uint32_t), 64)
inside xhci_bringup() and it crashed amd64 with a page fault (IFETCH at
RIP=CR2=0xA0000, the legacy VGA hole) during the unrelated Mama-VM-birth
phase afterward -- a heap-corruption signature, not chased to root cause.
Switching to a fixed array (matching this driver's existing preference
for fixed over dynamic allocation) made the crash go away; the crashing
boot's log is kept (logs/20260822-102516/) as the evidence trail.
Verified live via QMP hotplug, all three architectures: connect ->
"enable slot command submitted" -> "enable slot succeeded", with a
disconnect/reconnect cycle repeating cleanly and no port wedge.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01HZ8kNoTuP63pbQtro4qvrm
xhci_poll_events()'s Port Status Change branch now decodes the Port ID
from the event TRB (XHCI_PSC_EVT_PORT_ID, new in xhci.h), reads that
port's PORTSC.CCS via a new xhci_port_regs() helper, and logs connect vs.
disconnect. Acknowledges by writing back only PP (preserved) and CSC (the
bit being cleared) -- PED/PR/other _C bits written 0 so nothing is
accidentally disabled, reset, or silently cleared, matching the RW1C
discipline already used for ERDP.EHB in 2d.
Verified with the real target scenario via QMP hotplug on all three
architectures: boot with the xHCI controller present but no USB device
attached (confirmed zero port activity at ok>), then live
attach/detach/re-attach of a virtual USB thumb drive
(disk/usb-thumbdrive-test.img via usb-storage on xhci0.0). Full
connect->disconnect->connect cycle confirmed clean (no port wedge) on
amd64; single connect confirmed on aarch64 and riscv64.
Still open: correlating Command Completion Events back to their issuing
command, driving Enable Slot/Address Device from this connect path
(currently only a boot-time smoke test), and the callback surface into
Section U's higher-level code.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01HZ8kNoTuP63pbQtro4qvrm
Verified live on amd64: booted with the xHCI controller present but no USB
device attached (no Port Status Change at ok>), then hotplug-attached a
virtual USB thumb drive via QMP (usb-storage on xhci0.0, backed by
disk/usb-thumbdrive-test.img) and got an immediate port status change
event -- the real connect trigger Milestone 2e's PORTSC handling will
consume next.
Confirmed blk_subsys_attach_device() (src/block_subsystem.c) is already
the correct integration point for USB -- it already appends a new device
to the end of the existing LBN chain, matching the intended design.
Documented the remaining gaps: no blkio_usb.c backend yet, no hot-detach
path in the device chain yet.
Decided the on-drive layout for USB thumb drives: GPT-partitioned (unlike
artemis.img's whole-device StarForth header), ~1GB metadata partition +
remainder for blocks, 16GB reference drive size, sizing tentative. No GPT
parser exists in kernel code yet -- new prerequisite work for Milestone
2h/3, not blocking current 2e work.
disk/usb-thumbdrive-test.img added as a tracked test fixture, per this
repo's standing convention that virtual disk/thumb-drive images used for
testing are committed, not left in scratchpad.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01HZ8kNoTuP63pbQtro4qvrm
Enable Slot command TRB submitted via a new xhci_submit_command()/
xhci_cmd_enable_slot(), ring doorbell 0, confirmed by a real Command
Completion Event on all three architectures -- the first time this driver
has written a TRB rather than only reading the Event Ring (2d). Added the
Command Ring's previously-missing Link TRB (xHCI 1.2 spec sec 4.9.2) for
wraparound correctness.
Port Register connect/disconnect handling, slot-ID/context bookkeeping,
Address Device, and the callback surface into Section U's code are still
open -- this is the discriminating first step, not full 2e.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01HZ8kNoTuP63pbQtro4qvrm
Implements Event Ring TRB parsing and ERDP dequeue-pointer update
(xhci_poll_events(), src/starkernel/usb/xhci.c), called from
sk_repl_idle()'s existing ~1s idle cadence rather than a per-arch
interrupt handler.
A first attempt wired real interrupt delivery (PCI->IOAPIC GSI routing,
a dedicated isr_stub34/vector 0x22, GIC/PLIC routing mirroring
virtio_input.c). Checked live via QMP query-pci before trusting it: the
amd64 PIRQ swizzle formula predicted GSI 16 for the xHCI controller at
PCI slot 4; the real QEMU-assigned IRQ was 10, and embedded ICH9
functions contradicted the same formula too. Reverted all of it back to
the exact committed baseline rather than chasing chipset PIRQ routing
further, and reframed around Section U item 6's own design intent
("interrupt-driven, coarse cadence, cheap early-exit... quick check
blocks... done") via sk_repl_idle() instead -- USB insertion is a
human-timescale event, not a hot path.
Added -device qemu-xhci to all three QEMU launch targets (required for
any of this to be testable). Verified end to end via genuine post-boot
hotplug (QMP device_add/device_del usb-storage): all three architectures
detect a live attach within seconds. A false-alarm heartbeat "freeze"
found mid-verification traced to querying the wrong counter
(vm->heartbeat.tick_count, which only advances during word execution,
not the kernel's real ISR-driven heartbeat_ticks()) -- confirmed via a
temporary diagnostic word, captured and reverted.
Full writeup, including the discarded interrupt-routing attempt and the
false-alarm investigation, in FABRIC-2.md's Milestone 2c/2d entries.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01HZ8kNoTuP63pbQtro4qvrm
xhci_bringup() (HC reset, DCBAA, Command/Event rings, RUN/STOP) was
uncommitted and referenced an XHCI_WAIT_FOR macro that was never defined,
breaking the build. Wired all four wait sites to the existing
xhci_wait_bit() helper instead, matching each register/bit/polarity
needed (halt-before-reset waits for HCH set; HCRST, CNR, and post-RUN
HCH waits all wait for their bit to clear).
Also flipped g_doe_log_enabled's default from 1 to 0 -- the per-tick
[HADES][DOE] CSV export was flooding every boot log and slowing
interactive verification for no reason during ordinary acceptance runs;
HB-ON still re-enables it at the REPL for anyone running an actual DoE
campaign.
Three-arch acceptance: amd64/aarch64/riscv64 all boot clean to ok>,
zero DoE rows in any log. aarch64 and riscv64 both exited cleanly via
BYE with no exception, confirming the earlier SMC->HVC PSCI fix still
holds. Logs and DoE CSV artifacts from this run included.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01HZ8kNoTuP63pbQtro4qvrm
New src/starkernel/usb/ subsystem directory (added to both
LOADER_SRCS_BASE and KERNEL_SRCS_BASE wildcards in Makefile.starkernel,
matching the existing virtio/*.c pattern). xhci_find_and_map() locates
the controller via the already-generic pci_find_first(), enables it,
maps BAR0 via the already-generic pci_map_bar(), and fills in all four
register-region pointers (cap/op/runtime/doorbell) plus max_slots/
max_ports/max_intrs from HCSPARAMS1 -- ready for controller bring-up
(2c) to consume directly.
No pci.c extension needed, per 2a's finding that PCI discovery here is
ID-based lookup (already generic), not class-code scanning. Verified:
clean standalone syntax check, full amd64 kernel build with zero
warnings, live boot still reaches POST 1012/0/0 unaffected (nothing
calls xhci_find_and_map() yet, so this is purely additive).
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
live via QMP, ring sizing decided
include/starkernel/xhci.h: Capability/Operational/Runtime register
layouts, Port Register Set, Interrupter Register Set, Doorbell Array,
16-byte TRB struct -- all from the xHCI 1.2 spec, no existing
reference in this tree to build from (unlike virtio-blk). volatile
fields, no packed attribute, matching virtio_blk.c's documented
riscv64/QEMU-MMIO precedent. Compile-checked clean, sizeof(xhci_trb_t)
verified == 16.
QEMU qemu-xhci's PCI vendor:device ID (0x1B36:0x000D) confirmed live
via QMP query-pci against a real running instance -- not assumed from
memory, matches the Milestone 1 QMP infrastructure just built.
Ring sizing decided: fixed 256-TRB (one page) Command Ring and Event
Ring, single interrupter -- documented rationale in the header.
Bonus finding: src/starkernel/pci/pci.c already has more reusable
infrastructure than Milestone 2b assumed (pci_find_first is ID-based
lookup already existing; pci_bar/pci_map_bar/pci_enable are already
generic) -- 2b is smaller than originally scoped, noted in the punch
list.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Leftover from the milestone renumbering -- cross-references elsewhere
already said "Milestone 2e" etc., but the bare sub-item labels inside
Milestone 2's own section still said "3a."-"3h.". Now consistent.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
launch targets, three-arch verified
Makefile.starkernel: added -qmp unix:$QMP_SOCK,server=on,wait=off to
the amd64/aarch64/riscv64 qemu targets, matching the existing serial
chardev socket pattern exactly (same discoverability, same cleanup on
exit). Verified on all three architectures: QMP greeting arrives on
connect, qmp_capabilities handshake succeeds, device_add/device_del
round-trip correctly.
Real finding surfaced during device_add testing (recorded in
FABRIC-2.md's punch list for Milestone 2): the q35 machine's pcie.0
root bus doesn't support runtime PCI hotplug without a bridge --
Milestone 2's qemu-xhci USB controller needs to be present in the
static launch command, with USB devices hot-attached to its bus at
runtime, not the controller itself hot-added.
Also noted: g_doe_log_enabled's default-on per-tick heartbeat CSV
export was briefly mistaken for a hang during aarch64 verification --
it isn't one, just a large volume of routine diagnostic output before
reaching ok>. Not changing the source default; adopting HB-OFF
immediately after boot as the working pattern for the rest of this
punch list's dev work.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
execution order, physically reordered in the file
Previously kept stable IDs with a separate "read this note for the
real order" translation layer. Renumbered so the milestone numbers
themselves read top-to-bottom in execution order and physically
reordered the ### Milestone blocks in Section X to match -- no
translation needed anymore. New order: 1=QEMU monitor/QMP socket,
2=USB hardware stack, 3=block subsystem extensions, 4=drive/credential
security, 5=console/VM key-match binding, 6=PKI signing chain,
7=contributor capsules/trust tiers, 8=bare-metal USB boot (still
second-to-last, not first -- QEMU-first per Captain Bob's explicit
reinforcement), 9=networking (unchanged, still last). All cross-
references between milestones (including Milestone 2's internal
sub-item labels 2a-2h) updated to match throughout Sections U, W, and
X.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
continuous chain, not two parallel paths; resolves Milestone 7's
bootstrapping question precisely, not just for dev/test
Captain Bob's precise correction: "my own real root CA -> snakeoil
embedded cert -> blob & capsule + MANIFEST.md" is one chain. The
snakeoil intermediate is CA-signed, not self-signed/untrusted --
"snakeoil" names its informal/private-project status, not that it
lacks a real trust root. This means Milestone 7's CA-bootstrapping
question (how does the CA public key get into the kernel without
being just another unverifiable capsule) is resolved outright, not
just worked around for dev/test builds as the previous draft of
Section U's fourth addendum implied: trust is established once, at
build time, by whoever holds the real root CA and produces the build.
No kernel-boot-time verification against a hardcoded CA public key is
needed at all. Corrected both Section U item 20 and Milestone 7's
punch list in Section X to match.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
cert resolves Milestone 7's bootstrapping question for dev/test builds
Three distinct user-role tiers clarified (builder+dev, SDK-only dev,
no-SDK user) -- refines the trust-tier question beyond a simple core/
contrib boundary. More importantly: a snakeoil cert embedded directly
into each build (not loaded as a capsule, not verified against an
external CA at boot) is the actual answer to the CA-bootstrapping
problem Section X's Milestone 7 punch-list surfaced, at least for dev/
test builds -- trust is established at build time, sidestepping the
runtime chicken-and-egg entirely for that case. Two paths into a build
confirmed: snakeoil-signed, or code review + inclusion in the source
repo -- the latter likely makes at least one of Milestone 8's four
spitballed trust-tier directions (signature-authority tiers)
redundant, worth revisiting before picking one.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
in QEMU first, defer real-hardware USB boot to last; add UEFI-only
boot-path constraint
Captain Bob's explicit correction: real-hardware boot is "difficult
and lots of blind guesswork" (no serial log, unknown firmware quirks)
and isn't worth attempting until there's a working Artemis subsystem
to actually demonstrate, not just an empty kernel proving UEFI boot
works. QEMU's own USB hotplug emulation is sufficient to build and
validate the entire home-blocks subsystem without touching real
hardware at all.
Milestone IDs in Section X kept stable (not renumbered, to avoid
breaking cross-references between milestones) with an explicit
execution-order note instead: 2 -> 3 -> 4 -> 5 -> 6 -> 7 -> 8 -> 1,
networking (9) still deferred past all of them.
New scope constraint captured for whenever Milestone 1 resumes: UEFI-
only boot path, no legacy BIOS/MBR, no GRUB2 -- starkernel_loader.efi
is meant to be the entire boot path, not one stage in a longer chain.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
breakdown across all 9 milestones, no code written
Nine milestones, in Section W's sequencing order, each broken down to
single-function granularity per Captain Bob's explicit request:
1. Bare-metal USB boot (demo mode) -- the actual near-term milestone,
~9 concrete steps from ISO build through real-hardware validation.
2. QEMU monitor/QMP socket -- small dev-workflow unblock.
3. USB hardware stack -- the hard prerequisite, broken into 8 sub-areas
(spec groundwork, PCI discovery, controller bring-up, interrupt/
event handling, hotplug detection, device enumeration, Bulk-Only
Transport read/write, block-subsystem integration) since nothing
in this tree has ever touched USB before.
4. Block subsystem extensions (identity-derived ranges, drive map,
migration state machine, sk_repl_idle() body, unclean-removal
handling).
5. Drive/credential security (foreign-drive signature, zuse one-way
burn extending the existing acl_pinned mechanism).
6. Console/VM key-match binding.
7. Kernel/capsule PKI signing chain, including a real open
bootstrapping question (how the CA public key itself gets into the
kernel without being just another capsule) not previously
surfaced in Sections U/V/W.
8. Contributor capsules/trust tiers.
9. Networking -- deliberately left unexpanded, deferred per Captain
Bob's own sequencing, not premature-detailed.
Every item cross-references back to the specific Section U requirement
and Section V verified-status finding it comes from. Still direction
only -- no code, no capsule work started.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
one place, pulling together Sections U and V
Single-read consolidation of the whole Artemis thumbdrive/home-blocks/
PKI vision: one-paragraph statement of intent, a component table
cross-referencing each piece to its detail (Section U) and verified
status (Section V), and explicit sequencing with the actual near-term
milestone first -- bare-metal boot from a physical USB stick in demo/
"try it" mode, confirmed NOT gated on the USB hardware driver gap
since booting from USB is a UEFI firmware responsibility, not a kernel
one. The existing starkernel.iso/raw-disk-image build artifacts (built
on every QEMU launch already) are, mechanically, what gets dd'd onto a
physical drive for this. Two 64GB SanDisk drives confirmed on hand and
available now. Everything else in the concept board explicitly waits
on the USB hardware driver as the singular hard prerequisite.
Still direction only -- nothing implemented, no hardware testing done.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
blocks/thumbdrive/PKI subsystem against the actual codebase
Systematic pass over every requirement gathered in Section U, each
verified directly against the tree rather than recalled. Organized by
area (physical block layout, USB hardware, drive/credential security,
console/VM binding, capsule signing/PKI, contributor trust tiers,
networking, dev workflow).
Found more than expected already exists and is reusable as-is: the
block address space and device-chain abstraction, sk_repl_idle()'s
empty trigger hook, capsule_birth_baby()'s on-demand VM spin-up,
acl_pinned's one-way-ratchet mechanism (a direct precedent for the
zuse one-way-burn requirement), arbitrary binary payload capsule
embedding (proven by the font capsule), the manifest's already-
documented Ed25519 anchor point, and the live-boot ISO pipeline.
Confirmed real, clearly-scoped gaps with nothing partially started:
identity-to-block-range derivation, the block migration state machine,
drive-map format, console/VM key binding, all signature/cert
verification code, magic-number content-type/foreign-drive detection,
the contributor trust-tier flag, QEMU monitor socket exposure, and the
install path.
Identifies the USB stack itself as the one hard, load-bearing
prerequisite gating almost every other gap from being testable at all,
even in QEMU -- the honest first-cut recommendation if a concrete next
milestone gets picked from this analysis.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
sequencing, and spitballed trust-tier ideas -- still brainstorming,
nothing implemented
Captures the QEMU-dev-environment assumption, confirms capsules/contrib/
would fit the existing subdirectory convention (artemis/, common/,
fonts/, hermes/ already exist), and confirms via mkcapsule.c that no
provenance/trust-tier distinction exists today -- every non-Mama-init
capsule gets identical FLAG_PRODUCTION|FLAG_EXPERIMENT unconditionally.
Explicit sequencing: ACL/PKI work closes first, then contrib-directory/
trust-tier work, then networking (downloadable capsules named but not
scoped). Closes with four explicitly-unvetted spitballed directions on
the trust-tier question, requested as free brainstorm: a new
FLAG_CONTRIB bit, signature-authority tiers hanging off the cert chain,
block-namespace sandboxing for contrib capsules, and QEMU-vs-real-
hardware conditional signature enforcement.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
extending items 7-8 -- still brainstorming, nothing implemented
Five more points captured: (10) intermediate cert embedded as a capsule
blob (CA stays external/unrevocable), reusing the capsule system's
already-proven arbitrary-binary-payload capability (the font capsule is
existing precedent); (11) two-stage validation chain, both stages net
new code; (12) confirmed via tools/mkcapsule.c's own header comment
that Ed25519 signing hanging off the xxHash64 manifest column was
already the documented Phase 8 plan, independent of this conversation
-- strong validation of the whole direction; (13) signing granularity
is per-capsule, matching the existing hash column's 1:1 file
granularity exactly; (14) content-type detection via magic numbers
rather than a new MIME-type field, and confirmed to be the same
mechanism as item 7's foreign-drive detection -- one shared
byte-sniffing primitive plausibly serves both.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
burn, console/VM key-match attachment -- still brainstorming, nothing
implemented
Three more requirements captured while fresh, same design session:
(7) home-blocks write path must check for a home-blocks signature
before ever writing to an inserted drive, warn and refuse on foreign/
unrecognized/blank media instead of silently claiming it; (8) zuse
credential minting is one-way, asymmetric with an operator drive's
presumed re-provisioning path; (9) console/VM split -- console is
generic and shared, drive insertion spins up a per-identity VM (a
Tripod-birth-mechanism consumer), and console-to-VM attachment is a
key/lock match, structurally similar to ACL-PIN's existing key model
but not yet confirmed to reuse it directly.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
direction notes -- brainstorming only, nothing implemented
Captures the direction from a design conversation immediately following
the ACL-TTL campaign close (Section T): Phase 8 PKI/thumbdrive context,
confirmation that zero USB code exists anywhere in the kernel today,
verification that the block-address-space layout the conversation
converged on independently already matches block_subsystem.h's own
documented (unimplemented) chained-device design almost exactly, and
six requirements gathered in order (no quota for now, re-insertion
consistency, identity-derived not attach-order-derived block ranges,
drive-carries-its-own-map, bidirectional transparent block migration
as a state machine, and sk_repl_idle() as the likely trigger hook --
already an empty coarse-cadence placeholder found during Section R).
Explicitly not a spec or plan of record -- written up so the next
session starts from an accurate baseline instead of re-deriving the
shape from scratch. No code, no design doc, no capsule work started.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Section T -- +0.0603%, final accepted figure
Extended Section S's 3-seed/9-pair campaign to 6 seeds/18 pairs (36
cells) per Captain Bob's request for a fuller campaign before moving
on. All 36 cells: 480/480 rows, 0 errors, 17,280/17,280 rows total.
Every one of 18 disabled cells reads exactly 261063 ticks -- CV=0.000%
across all 3 architectures and 6 seeds, zero exceptions. Every enabled
cell's tick count is fully determined by seed alone, identical across
all 3 architectures, zero exceptions. Pooled overhead across all 18
pairs: +0.0603% (mean +0.0603%, stdev 0.0008%, range +0.0598%-
+0.0617%) -- statistically indistinguishable from Section S's 9-pair
figure, now confirmed over double the data with 3 entirely new seeds.
This closes the ACL-TTL overhead measurement line of investigation
(Sections P, Q, R, S, T). +0.0603% is the final accepted figure.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
amd64/99999/enabled, aarch64/24680/disabled added (cell 26 needed a
retry after an unexplained external SIGTERM killed the qemu process
mid-boot -- matches a previously-noted, still-unexplained SIGTERM
recurrence from a process named "claude", first seen 2026-08-18;
1-line stub log from the killed attempt kept as audit trail). All
successful cells: 480/480 rows, 0 errors.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
amd64/24680/disabled, amd64/24680/enabled, aarch64/11111/enabled
added. All 480/480 rows, 0 errors. Cross-arch consistency continues
holding: seed 24680 gives 261219 on both riscv64 and amd64; seed 11111
gives 261222 on both amd64 and aarch64.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
