Files
LithosAnanake/logs
Robert Allan JamesandClaude Sonnet 5 b4bbd043d0 Artemis Milestone 2f: SET_CONFIGURATION -- 2f complete
Chains off a confirmed Mass Storage/SCSI/BOT interface match via the
existing next_action deferral mechanism: device descriptor -> config
descriptor -> SET_CONFIGURATION is now a single automatic sequence.
bConfigurationValue is read directly out of the already-fetched
config_descriptor buffer, no extra transfer needed.

First write control transfer this driver has issued (every prior one was
a read), so it needed its own submission helper,
xhci_ep0_control_write_nodata() -- SET_CONFIGURATION has no Data Stage
(wLength=0), and per USB 2.0 spec 8.5.3 a no-data control transfer's
Status Stage is always IN, the reverse of an OUT-data request's status
stage. XHCI_SETUP_TRT_NO_DATA already existed in xhci.h, unused until now.

Verified live via QMP hotplug, all three architectures, worked first try,
byte-identical: "set configuration submitted" -> "device configured",
guest stays running throughout (checked via QMP query-status). Disconnect
confirmed clean on every arch afterward, no wedge. FABRIC-2.md Section X
Milestone 2f updated -- 2f is now fully complete, 2g (Bulk-Only Transport)
can start.

Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01QPfdtaXs9ay1nbwuMnrscu
2026-08-25 07:40:16 -04:00
..
2026-08-02 05:11:24 -04:00
2026-08-02 05:11:24 -04:00
2026-08-02 05:11:24 -04:00

logs/

QEMU acceptance-run history and Tripod smoke-test results.

  • <timestamp>/{amd64,aarch64,riscv64}/ — 255 timestamped three-arch QEMU acceptance run directories, one per invocation of the kernel QEMU acceptance workflow.
  • qemu-screenshot-*.png, qemu-screenshot-*.log, qemu-{amd64,aarch64,riscv64}-*.log, fbtest-console-*.png — loose timestamped QEMU serial captures and framebuffer screenshots from individual manual runs (not part of the timestamped-directory convention above).
  • hermes-tripod-smoke-results.md, hermes-channel-smoke-results.md — captured output from tools/hermes_tripod_smoke.sh and tools/hermes_channel_smoke.sh.
  • hermes-tripod-integration-design.md — design notes for the Tripod integration test.

Note: QEMU_BASELINE.log at the repo root (not in this directory) is the primary kernel regression baseline referenced by .claude/CLAUDE.md; the logs here are supplementary historical captures. See also logs2/ (a separate, flatter QEMU log archive) and experiments/bare_metal/runs/ (DoE-specific run output).